Fitting Cat Flap In UPVC Door Panel

Cat flaps allow your pet to leave and come back at their own pace, without needing to let them in or out. They also can help stop your cat from urinating inside the house.

Installing a cat flap on a door panel made of Upvc is a lot easier than glass doors, however it requires some knowledge and the proper tools.

Take a look at the Door

The installation of a cat flap in the front door is difficult however, provided that the cat flap is the correct one and you follow the instructions you can make it less difficult. We will be showing you how to mark out the shape, use the jigsaw to slice the door's opening and then finish off the job by securing the cat flap to the door. This will ensure the flap remains in place and protects the doors from damage caused by wind and rain.

The first thing you need to do is take a measurement of the width of your pet to get a precise measurement of the size of cat flap you'll need. This will allow you to select a cat flap that is large enough to allow your pet to walk into the house and exit without needing to open the door each time.

If your kit comes with an illustration of where to drill then you can place it on the door and then use a pencil around it. If your door has moulding or a sill at the bottom, be sure you leave plenty of space between your cat and these elements.

Next put on your eye protection and a dust mask. Then using a jigsaw, begin to cut along the line that you have pencilled in. Don't press the blade too hard as this can cause it to cut more quickly than you want it to. If you have a square that you have cut, use it to ensure that you're cutting properly and to make sure the hole is a proper rectangle shape, once you are satisfied with the shape, you can start to remove the remaining door material.

Draw a Line

The cat flap lets you to let your pet go inside and out without having to worry about unwanted visitors or unwanted gifts. It also prevents drafts and helps to keep the temperature inside your home in a stable manner. The installation of a cat flap cost flap your door may seem daunting to those who haven't tried it before. Many people will call an expert joiner or carpenter to do the job. This is an option but you can do it yourself if the tools are right and the directions are adhered to.

While this is far easier to do with a timber door, it is still possible in uPVC doors, but you should be cautious not to damage the doors, as this can invalidate the warranty. First, you must measure the door to ensure that it can accommodate the new cat-flap. If you have an ordinary uPVC panel, this should be easy. However in the case of composite or another type of door, you might require more care.

Next, you will need to determine the belly height of your cat flap bifold doors. This is the distance from the floor to the lower part of the cat's stomach and you'll need find a place near the door that will be within the range your cat flap in upvc door panel (her latest blog) is able to comfortably walk through. Once you've figured out the measurements you'll have to mark the area with a spirit-level and a pencil, so that you are certain that the hole will fit your cat.

After you've marked the area, you're now ready to cut the hole. You will need to use an jigsaw. It is crucial to take your time to ensure that the cuts are smooth and cat flap In Upvc door panel clean instead of uneven and rough, as this could damage your door. Wear safety glasses and a dust mask when working with the jigsaw. Inhaling sawdust is dangerous for your health. After you've completed the cutting process, you will have to smooth the edges of the hole with sandpaper, so that the cat flap will fit easily in place.

Cut a hole

It can be difficult to install an animal flap on a door panel or a sealed double glazing unit. If you're not skilled in DIY, it is best to hire a professional to complete the work for you. A botched job could not only be ugly, but also pose an security risk. It could let cold air to enter when the cat is outdoors and hot air out when inside.

The first thing you have to do is mark the location of the hole in the door with pencil and a spirit level, this will ensure that it is located and is in a straight line with other parts of the door. Make sure you have an sandpaper piece on the ready to smooth any edges.

Once the line has been marked you should cut out the hole with a jigsaw. Be sure to wear the appropriate safety equipment when working with a power tool. If you are concerned about the sound of a jigsaw you can buy a cordless version which is quieter and more user-friendly to use.

You should only remove the material required to create the flap. A small amount of material is required to increase the thickness of the the cat flap itself but cutting off more than this could cause issues and harm the frame of the door.

A door Cat flap in upvc door Panel made of upvc could contain a metal frame or panel within it which could block the microchip cat flap, and if this is the case, you will need to cut an oversize hole so that the metal does not get in contact with the the cat flap, if this is done it is important to fill in the oversize gap and seal it with water.

If you are fitting an animal flap to a upvc door or double glazed window cat flap with a metal frame, you'll need to speak to a professional who will provide you with a brand new pane of glass that already has the hole for the cat flap premade in it. It is cheaper to do this than trying to fix a cat flap into an existing pane of glass that hasn't been designed specifically for this purpose.

Place the Flap

Cat flaps allow your pet the freedom to move around anytime they want and let them relax in the home whenever they'd like. If you've got an uPVC door, it might be difficult to install a cat flap, particularly if you don't own glass panes that could be cut to fit one. If you're able to buy and install a half-glazed replacement uPVC panel then it is possible to add an animal flap onto these doors. It's not a simple matter of slicing holes in the door. It is also necessary to take a few steps to ensure that it is safe.

A composite, uPVC, or GRP door panel is typically made up of a flimsy plastic outer skin bonded to a soft polystyrene core that is insulating. It is important to be careful when cutting the material. This type of door usually comes with a template drawing which you can use as a guide to cut the hole in the door.

Once you have marked the position of the hole in your door, it's time to put in the cat flap itself. You can pick from a wide range of options, from simple push-button flaps to microchip-activated ones that allow your pet in. However, no matter what kind of cat flap you choose it's important to make sure that your cat is able to use the flap without becoming trapped outside in bad weather.

A circular fitting is superior than a square one, as circles can be cut more securely into glass. It's because square holes are more likely to break the glass when they are drilled. It's also a much safer choice to use since you're not at risk of having to drill into toughened glass that may break and injure your pet or family members. This is especially crucial if you have elderly or children in your home who could be injured by glass shards.